uucp using TCP

[Armando Carreto_1]

Hi

I ve alredy configured uucp using TCP but speed is too slow I Think the reason
is by default uucpd use protocol "g" wich use control flow and is used in
serial lines but I dont Know how i can change This option to "e" or "t" or How
can I improve speed of the uucp using TCP?
Version of Hp-UX is 10.20
Tanks in andance

[Jim Butler_4]

check the speed indicated in /etc/uucp/Devices

[Armando Carreto_1]

When You configure uucp using TCP speed in /usr/lib/uucp/Devices is "-" I think
is High possibly
but I am not sure Where I can find information About this file
/usr/lib/uucp/Devices has teh follow line
TCP - - - TCP