HPE Community
Operating System - HP-UX
1850214 Members
2231 Online
104050 Solutions
New Discussion

Re: vgchgid problem

 
Arockia Jegan
Trusted Contributor

‎09-09-2002 08:42 PM

‎09-09-2002 08:42 PM

vgchgid problem

Hi I'm trying to run vgchgid against the BCV devices and getting the following errors,

vgchgid: physical volume "/dev/rdsk/c6t3d6" and "/dev/rdsk/c6t3d7" do not belong
to the same volume group.

But these BCV devices are attached to the standard devices that are on the same volume group. Any ideas? Earlier it worked fine.
0 Kudos
Reply
3 REPLIES 3
Dietmar Konermann
Honored Contributor

‎09-09-2002 10:23 PM

‎09-09-2002 10:23 PM

Re: vgchgid problem

Hi!

You should check if both disks hold the same VGID, e.g. using

"echo 0d8208?DY" | adb /dev/dsk/cXtYdZ

Regards...
Dietmar.
"Logic is the beginning of wisdom; not the end." -- Spock (Star Trek VI: The Undiscovered Country)
0 Kudos
Reply
Ashwani Kashyap
Honored Contributor

‎09-10-2002 08:22 AM

‎09-10-2002 08:22 AM

Re: vgchgid problem

Try giving the names of all raw PV's that belong to one VG , in one command string with vgchgid .
0 Kudos
Reply
steven Burgess_2
Honored Contributor

‎09-10-2002 08:38 AM

‎09-10-2002 08:38 AM

Re: vgchgid problem

Arockia

Have a look at the below doc

http://support4.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000062909974

HTH

Steve
take your time and think things through
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.