Viewing Hardware configurations on HP-UX 10.20

[chris poarch]

I have a K360 box and need an easy way to view the hardware specs, I have tried sam, but it really doesn't give me a report of what the vendor is asking of me. And ioscan is not what I am looking for either. Does anyone know of a utility or a command in UNIX to get this information? I do not have Xwindows on this box.
Thanks!!!

[Rick Garland]

If you have the DIAGS loaded, you could use cstm (the character base of stm). This will detail for you how the HW is laidout.

DIAGS on on the support plus+ CD

[Antoanetta Naghiu]

STM is running from the HP term as a console with no GUI and I think is the best tool.
You can try command line: pvdisplay, vgdisplay, swapinfo, sysdef, ioscan -fn, lvlnboot -v, bdf, lvdisplay, lists of: /etc/fstab, /etc/nsswitch.conf, /etc/checklist, lpstat -t, swlist, and so on.

[Kofi ARTHIABAH]

try /opt/ignite/bin/print_manifest

if you do not have ignite installed, this might be a good time to do so.

http://www.software.hp.com/products/IUX

[Patrick Wessel]

Chris,
can you give us a more detailed idea what you are looking for?

[Vikas Khator]

Hi ,

Try downloading "sysinfo" from the HP's porting site and that might provide all you are looking for.

Regards,
Vikas