Vpar ignite make_net_recovery

[Aranzazu]

Hi,
I have to make a make_net_recovey of a phisical partition which have three virtual partitions.

I think i have to shutdown the three vp and restart the pp and stop in the starting.
Then in the ISL i start with hpux /stand/vmunix the phisical partition.

Then i do the make_net_recovery but, ¿how do a restart the vpars

[Sanjay_6]

Hi,

Take a look at this doc from hp docs site,

http://docs.hp.com/hpux/onlinedocs/T1335-90018/T1335-90018.html

Checkout this section,

http://docs.hp.com/cgi-bin/fsearch/framedisplay?top=/hpux/onlinedocs/T1335-90018/T1335-90018_top.html&con=/hpux/onlinedocs/T1335-90018/00/00/24-con.html&toc=/hpux/onlinedocs/T1335-90018/00/00/24-toc.html&searchterms=ignite&queryid=20041116-081028

and this,

http://docs.hp.com/cgi-bin/fsearch/framedisplay?top=/hpux/onlinedocs/T1335-90018/T1335-90018_top.html&con=/hpux/onlinedocs/T1335-90018/00/00/30-con.html&toc=/hpux/onlinedocs/T1335-90018/00/00/30-toc.html&searchterms=ignite&queryid=20041116-081028

Hope this helps.

Regds

[Aranzazu]

Thanks, i read this docs, but i can´t find answer in it.
One section is "how to recover" and the other is "how to install a new vpar form ignite".
But my question is: Ones I am in the phisical partition how can i start up the vpars

[Sanjay_6]

Hi,

to boot the vpar from the ISL prompt,

ISL>hpux /stand/vpmon vparload -p vpar_name

From the Vpar Monitor prompt,

MON> vparload -p vpar_name

Maybe this will be a useful doc,

http://www1.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000062686603

This itrc doc id is UVPARKBAN00000896.

hope this helps.

Regds

[Alzhy]

BCH> BO PRI
Yes to Interaction with ISL.

On ISL Prompt:
ISL> hpux /stand/vpmon

Changes to VPMON or MON Prompt:
MON> vparload -all

Under MON> prompt.. type ? or help.