[Vpar] No device files created for VA7400 disks

[krizevac]

Hi everyone,
I have 2 Vpar partitions on a N4000.
Both the partition are connected via fibre channel, trough a switch Brocade, to a VA7400 storage.
The primary partition in the ioscan show all the disks of the Va7400 but not the device file. If I try to build it with th insf -H command nothing appens.
The second partition see all the VA7400 disks and had the device files correctly.

Any suggestions???

[harry d brown jr]

Can you post your CONFIGURATIONS for your two partitions and a FULL ioscan of the system without vPars running?

Also, what kind of zoning do you have enabled on your brocade?

also, try "insf -e" to reinstall all device files. Plus check to make sure BOTH kernels have about the same device drivers loaded.

live free or die
harry

[Hai Nguyen_1]

Try to build with:

# insf -eH HW_path

Hai

[krizevac]

Ok.
I've solved the problem running the insf -e command after a reboot from the original hpux, (/stand/vmunix and not /stand/vpmon).
Thank you, very much!