VPARS on HP-UX

[walter crasto_1]

Hi,

Can any body tell me what are the required hardware & Software to implement VPARS on HP-UX
Also let me know what are the config. steps.

Thanks & Regards

Walter

[Anupam Anshu_1]

Hi Walter,

You may get your required informations on http://www.informit.com/articles/article.asp?p=26241&seqNum=6. This page explains Hewlett Packard Virtual Partitions.

HTH,
Anshu

[Naveej.K.A]

Hi Walter,

This link could be of a great help to you

http://us-support3.external.hp.com/iv/data/documents/DE_SW_UX_swrec_EN_01_E/vPars.pdf

with best wishes
Naveej

[R. Sri Ram Kishore_1]

Hi Walter,

The requirements for vPars can be found in the following page (in the "before installing" section ):
http://software.hp.com/portal/swdepot/displayProductInfo.do?productNumber=T1335AC

For more information on both requirements and configuration steps, refer to:
http://docs.hp.com/hpux/onlinedocs/5990-7226A/5990-7226A.html

HTH,
Sri Ram

[Bruno Ganino]

Hi Walter, explanations
http://www.informit.com/articles/article.asp?p=26241&seqNum=7

HTH
Bruno

[D Block 2]

you will need to double-up on your IO devices in order to build multiple partitions.

you will need the vPar (Virtual Partition) software.

you might want to get a hold of Marty's book ISBN 0-13-035212-8 2002 by HP, Marty Poniatowski, HP-UX Virtual Partitions.