(WBEM) HP-UX WBEM core hardware (FPL) event 7206

[Andrew Wolgamott]

We get about twenty of these errors every day on all of our HPUX servers. I cannot find any mention anywhere of event 7206 on itrc or google. These are minor events but I'm curious what is causing them.


ProviderName FPL_IndicationProvider
SystemCreationClassName CIM_ComputerSystem
AlertType Device Alert
PerceivedSeverity Minor
ProbableCause Other
ProbableCauseDescription See the previous event which requires additional data be sent.
EventID 7206

[Andrew Wolgamott]

Anyone?

[Torsten.]

The message should contain a link to the description.

You saw also this:

>> ProbableCauseDescription See the previous event which requires additional data be sent.


What was the previous message?


The FPL provider reads from the MP logs - take a look into!

[Torsten.]

Event Number: 7206

WBEM Severity: Other
Event Summary: MP Firmware Additional data for previous event.
Event Description: Some events require more data than that which fits in a single event. This data field is used to log the additional data.
Probable Cause: .
Event Category: System Firmware
Event Sub-Category: Unknown
Cause 1: See the previous event which requires additional data be sent.
Recommended Action 1: -




http://bizsupport1.austin.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=4191511&prodTypeId=18964&objectID=c02514925&printver=true

[Andrew Wolgamott]

These two events happen every day, multiple times on all of my HPUX Integrity blades:

27 Informational Management Processor 0 MP_SOFT_RESET 14 May 2011 21:36:48 Management Processor Firmware Soft Reset occurred.
26 Informational Management Processor 0 MP_SELFTEST_RESULT 14 May 2011 21:36:48 Management Processor Firmware Selftest Result

The MP f/w is 3.18

[Torsten.]

What blade model?

What is OA firmware version?

[Andrew Wolgamott]

All of our BL860c and BL870c blades. We have the latest f/w bundle on the chassis, 4.25. The OA is at 3.21, ILO2 3.18