HPE Community
Operating System - HP-UX
1845496 Members
2740 Online
110244 Solutions
New Discussion

What I can do?

 
Dmitry Zikratch
New Member

‎04-04-2001 11:16 AM

‎04-04-2001 11:16 AM

What I can do?

After changing IP address of LAN interface and restarting system I receive message "NFS server (pid5740/net)not responding still trying". Its'a last message that I receive. What I can do? Can I skip this step?
Never mind
0 Kudos
Reply
3 REPLIES 3
Brian Markus
Valued Contributor

‎04-04-2001 11:26 AM

‎04-04-2001 11:26 AM

Re: What I can do?

Durring boot if you get hung up on something you can press:

Shift CLT |

That will break out of that process and go to the prompt.

Hope that helps.

Brian
When a sys-admin say's maybe, they don't mean 'yes'!
0 Kudos
Reply
John Bolene
Honored Contributor

‎04-04-2001 11:27 AM

‎04-04-2001 11:27 AM

Re: What I can do?

A bit more info is needed, machine type, OS level, Xterminal, etc.

You might have changed subnets and can't get to the NFS drive that is shared.

IP before and after might help also.
It is always a good day when you are launching rockets! http://tripolioklahoma.org, Mostly Missiles http://mostlymissiles.com
0 Kudos
Reply
Mark Mitchell
Trusted Contributor

‎04-04-2001 11:35 AM

‎04-04-2001 11:35 AM

Re: What I can do?

Sounds like you used SAM to work on the card. To check out what was done, go to the /etc/rc.config.d
Look at the entries in the file netconf and make sure that the gateway matches the new lan scheme. Check the other settings. Then when done enter this to restart network services
/sbin/init.d/net stop
/sbin/init.d/net start
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.