HPE Community
Operating System - HP-UX
1833763 Members
2579 Online
110063 Solutions
New Discussion

Where do I find the speed/duplex setting on 11.00 server?

 
Chet Woods
Frequent Advisor

‎08-18-2000 05:55 AM

‎08-18-2000 05:55 AM

Where do I find the speed/duplex setting on 11.00 server?

I need to find out what my 11.00 server is running at. Could anyone tell me where to find these settings?
0 Kudos
Reply
3 REPLIES 3
John Palmer
Honored Contributor

‎08-18-2000 06:00 AM

‎08-18-2000 06:00 AM

Re: Where do I find the speed/duplex setting on 11.00 server?

If you mean your LAN cards, then
lanadmin
lan
ppa (if necessary to select the lan card)
display

will give you the details.
0 Kudos
Reply
Kofi ARTHIABAH
Honored Contributor

‎08-18-2000 06:00 AM

‎08-18-2000 06:00 AM

Re: Where do I find the speed/duplex setting on 11.00 server?

You need to run "lanadmin" - do a man on lanadmin. you can also check the card's configuration in /etc/rc.config.d/hp*
(depends on what machine you have)
nothing wrong with me that a few lines of code cannot fix!
0 Kudos
Reply
Rick Garland
Honored Contributor

‎08-18-2000 06:06 AM

‎08-18-2000 06:06 AM

Re: Where do I find the speed/duplex setting on 11.00 server?

lanadmin -x will detail this for you. However, depending on the driver in use, you may need some patches to get around the "Hardware not supported for this option"

If you are with a btlan4 PCIethernet, need patches PHNE_21673, PHNE_21217, PHNE_20316, and PHNE_21767
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.