Where to find the latest EMS version

[V.Manoharan]

Hi I have upgraded EMS A.03.20.01 to latest version of EMS A.04.20 . But the Diskmonitor and EMS-RdbmsMon is still A.03.20.01. Please advise to upgrade Diskmonitor and rdbmsMon also to 4.20. I have enclosed the swlist output for your reference.

# swlist -l product |grep -i ems
EMS-Config A.04.20 EMS Config
EMS-Core A.04.20 EMS Core Product
EMS-DiskMonitor A.03.20.01 EMS Disk Resource Monitor
EMS-KRMonitor A.11.11.05 EMS Kernel Resource Monitor
EMS-MIBMonitor A.04.20 EMS MIB Resource Monitor Product
EMS-RdbmsMon A.03.20.01 EMS Database Monitor
Isee_EmsListener A.11.09.10 ISEE TCP listener for EMS events
PHSS_26947 1.0 EMS & HA Monitors (A.03.20.01) patch
Sup-Tool-Mgr B.11.11.17.02 Support Tools Manager for HPUX systems

[NMory · Accepted solution]

You can use the Release Notes as a reference:

http://docs.hp.com/en/B5736-90058/ch01s04.html?btnNext=next%A0%BB

You can refer to:
http://docs.hp.com/en/B5735-90001/index.html

For installation instructions.

The High Availability Monitors product can be installed on a running system in multi-user mode.

You can use the software management tools in SAM or the swinstall command to install HA Monitors.

The HA Monitors version A.04.20 bundle (Part number B5736DA) contains the following file sets that will be installed on PA platform:

EMS-MIBMonitor.MIBMON-RUN â MIB (Management Information Base) monitors for cluster, networking interface, and system resources

EMS-DiskMonitor.DISKMON-RUN â Disk monitor for physical and logical volume resources configured by LVM

EMS-RdbmsMon.RDBMSMON-RUN â Database monitor for MIB resources

Try to unistall your monitor and install them again via swinstall.

Regards,

LN

[NMory]

Download link:

http://h20293.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=B7609BA

LN

[V.Manoharan]

Hi nassar,
Thanks for the response , If I downloade with B5736DA then i get Node and Host Name Expansion , if I try to explore through sam I get the below error messages.

" Currently, there are no products on this source which are compatible with the target. Therefore, no products are shown. "

I installed EMS from below link only
http://h20293.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=B7609BA

I have tried installing online diage version OnlineDiag_B.11.11.17.02 but no use

Please let me know where I can get the HA Monitor version 4.20

[James R. Ferguson]

Hi:

Try here:

http://h20293.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=B6191AAE

Regards!

...JRF...

[V.Manoharan]

Hi James,
I downloaded (OnlineDiag_B.11.11.17.02_HP-UX_B.11.11_32+64.depot)
and installed the same one only. But I am not finding any differnce in swlist.

I want the below components to be updated to A.4.20 .
EMS-DiskMonitor A.03.20.01 EMS Disk Resource Monitor
EMS-RdbmsMon A.03.20.01 EMS Database Monitor
PHSS_26947 1.0 EMS & HA Monitors (A.03.20.01) patch


Thanks and regards
V.Manoharan

[NMory]

When you install EMS B7609BA or EMS Developer's Kit B7611BA on HP-UX 11i, ensure that High Availability Monitors (B5736DA) is also upgraded to the same version. For example, when you install EMS A.04.20, ensure that you also install High Availability Monitors A.04.20.

Do you have a September 2005 Applications CD?

[NMory]

According to this website

http://www.hp.com/softwarereleases

And specially:

http://www.hp.com/softwarereleases/releases-media2/latest/aps/0509/server.htm

The HAmonitors version A.04.20 for 11.11 starts on the September 2005 Application CDs

LN

[NMory]

You can use any application CD dated from Sep 2005 til this date (http://www.hp.com/softwarereleases/releases-media2/latest/aps/applications.htm )

LN

[NMory]

Apparently the HA Monitors is a bundle that has to be purchased...I don't seem to find a download area. I think it has to be with the application CD, not sure...

[Andrew Merritt_2]

The HA Monitors are a separately chargeable product, and they come with the Application Release. I don't think they can be downloaded from the website.

When you install the A.04.20 version of the HA Monitors, you would automatically get EMS updated to A.04.20.

Note you would also need to upgrade the OnlineDiags to a version compatible with EMS A.04.20 (that should also happen automatically).

For example, see the 0606 AR DVD contents here - http://www.hp.com/softwarereleases/releases-media2/media/5013-4947.htm


Andrew

[V.Manoharan]

I was able to install laterst version of EMS with support CD's.