wu-ftp 2.6.1 on HP-UX 11

[Eric_63]

I will be upgrading from HP-UX 10.20 to 11 and I want to use wu-ftp 2.6.1. I have been using wu-ftp 2.6.0 on HP-UX 10.20 and it works great. Before I try to install wu-ftp 2.6.1 I want to be sure it will work on HP-UX 11.

I would like to know if anyone is running wu-ftp 2.6.1 on HP-UX 11.

[Clemens van Everdingen]

Hi,

Yes is running fine on UX 11.00

Get it here:

http://hpux.cs.utah.edu/hppd/hpux/Networking/FTP/wu_ftpd-2.6.1/

C.

[Jeff Schussele]

Hi,

This thread may be of interest to you.

http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0x7a6b46ff9277d511abcd0090277a778c,00.html

Here's another one that states 11.0 is supported but that 10.2 wasn't

http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0x08b579bffde7d4118fef0090279cd0f9,00.html

BTW these were found using
+wu-ftp +HP-Ux11.0
in an ITRC search of forums.

Rgds,
Jeff

[Kevin Wright]

I have it running fine on HPUX 11i. You shouldn't have any problems.

[Brian Hackley]

Eric,

HP has a supported wu-ftp 2.6.1 for HPUX 11 and 11.i available for free download via http://software.hp.com ->internet and security solutions -> wu-ftpd 2.6 special release

Yes, its really 2.6.1 and works fine.

Hope this helps,

-> Brian Hackley

[Eric_63]

Thanks for all the replies.