X.25 Connectivity....

[Jaikishan B Sambhwani]

Hi,

We Have a X.25 Card, We want to connect these to X.25 Network.
I don`t know what devices are required to connect these card to X.25 Network.
And also what are the other details required to configure X.25 card.
We also have MC/Service Guard Configured
Can we configured these card for MC/Service Guard Redundancy.
If yes than what devices are required in the above mentioned Scenario.

Thanx.....
Jai

[Berlene Herren]

Check out

http://docs.hp.com/hpux/onlinedocs/J2793-90044/J2793-90044.html

"About the X.25 Product.



Berlene

[Byron Myers]

For the Service Guard question, you configure these like any other NIC. Edit your cluster configuration file (made from "cmquerycl" command, and put entries for the "NETWORK_INERFACE". The first entry will be the primary NIC, the second entry will be used for failover. The package configuration file (made from "cmmakepkg" command) will be used to define the IP address, and subnet to monitor. You will add entries for "IP[]" and "SUBNET[]" array variables.