1847144 Members
5738 Online
110263 Solutions
New Discussion

Re: X-server

 
Loc Dao
New Member

X-server

Hello All,

I have C200, C110 boxes w/ FX4 graphics card. Previously, I loaded both 11.11b 11.0 and everything was OK. On those same box, I upgraded the HD and reloaded the OS and I can't not get the Xserver to load at all. Error message.

Can not start X-server

I have run /usr/contrib/bin/X11/dr_dt and found nothing wrong, hpterm is linked to /usr/bin/X11/hpterm. I also tried these command
cd /dev
rmsf *crt*
insf -evd framebuf

run /usr/contrib/bin/X11/xinit and got the following errors:

"Fatal Server error:
Couldn't open X pointer device! Is one attached?
...giving up
...Connection refused (errno 239): unable to connect to X server
...No such process (errno 3): Server error.

/var/dt/Xerrors:
Fatal server error:
Couldn't open X pointer device! Is one attached?
connection to :0.0 broken (explicit kill or server shutdown).


Also, no error when starting up. /etc/rc.log is clean.
Thanks for your help.

1 REPLY 1
Bill Hassell
Honored Contributor

Re: X-server

The pointing device is your mouse and when the Xserver tested for the three required components (video, keyboard and pointing device) a failure was detected. Swap with another mouse. If it still fails, there is a possibility that the mouse port is bad. Use ioscan -fn to check all the hardware components and their device files.


Bill Hassell, sysadmin