XDMCP broadcast from X terminal, staring CDE stops

[Kuszinger Robert]

Hello!

The problem:

Using an X terminal (X server, emu, Hummingbird Exceed) after a broadcast and
selecting the HP-UX 11
box (class D380), the login screen appears correctly.

after entering username/password the blue screen
appears (starting CDE, and so on),

and nothing else happens.

startlog:

--- Mon Dec 27 15:31:49 MET 1999
--- /usr/dt/bin/Xsession starting...
--- Xsession started by dtlogin
--- sourcing /home/tdss/.dtprofile...
--- sourcing /usr/dt/config/Xsession.d/0010.dtpaths...
--- sourcing /usr/dt/config/Xsession.d/0020.dtims...
--- sourcing /usr/dt/config/Xsession.d/0030.dttmpdir...
--- sourcing /usr/dt/config/Xsession.d/0040.xmbind...
--- sourcing /usr/dt/config/Xsession.d/0060.srcsysenv...
Xsession (PATH): bad directory /usr/ucb ignored
--- sourcing /etc/dt/config/Xsession.d/8000.migration...
--- starting /usr/dt/bin/dthello &
--- starting /usr/dt/bin/dtsearchpath -ksh
--- starting /usr/dt/bin/dtappgather &
--- execing /usr/dt/bin/dtsession using /home/tdss/.profile...

it runs, and then nothing happens.
It is blue, and blue...


Usually with exceed there are no problems with HP-UX
10.20 and 11.

What else to check? Could it be an install problem
of CDE? scripts missing and so on...

thanks

Robert

[Nancy Hubert_1]

Hello,

to fix your problem, I suggest you to re-install CDE, X11, and the Xserver
filesets.

Regards.