xhost + , Xwindows

[piyut_1]

dears,

I have server rp7410. application need xwindows always on in this server ( in the monitor console , xwindows must be on).how to install and configure it??

thanks,

piyut

[Naveej.K.A]

Hi,

You have to purchase and install some third party applications like xterm, thunderbird on your windows PC, select the type of connection/emulation and you are through. You have GUI running.

But for the xwindows/CDE to get running on the console is difficult, as you may have to purchase a graphics card (a very $$costly$$ solution).

Regards,
Naveej

[piyut_1]

is there graphic card in rp7410 for default ??
I just want to display Xwindows in monitor console at my server (hpux server), not in my windows PC.

thx,

[renarios]

Hi Piyut,

By default, the console is not ment for graphical stuff. What is your purpose?

Cheers,
Renarios

[piyut_1]

The application need Xwindows always running in monitor console (always on). and must run command "xhost +". so..what can i do ?? should I buy graphical card?? how to check that my server have a graphical card??

[Cem Tugrul]

Hi Piyut,

once upon a time i had a same problem at once
My rp-5430 srv have Oracle ias Human resources application running...When we wanted to run report srv so we have seen
it did not work because it needed xhost
but my rp-5430 did not have any grfical interface then We solved the problem...
i have AIX 4.3.3 srv which have grafical console then on AIX console;
i have written;
xhost +
and on Hr server we directed my AIX's ip
address when my report server running..

We do not have any problem unless reboot
AIX srv...
if we reboot AIX then We run to the system
room and just from AIx console do;
xhost +
That's all....

PS:Our rp-5430 and AIx srv locates on different systems rooms so that's why we have to run other system room
:-)

[piyut_1]

ok cem,

i,ll try. thanks for this reply.


regards,

piyut