XMCD on 10.20

[Radim Jarosek]

Hi,

I have installed XMCD 2.6 on HP10.20.
The installation was succesful.
I get this message when I try rollback volume.
I have TEAC CD-532E-B.

-------------------
CD audio: SCSI command fault on /dev/rdsk/c0t0d0:
Opcode=0x15 Cdb_status=0x2 Sense_status=0x0 Key=0x5 Code=0x26 Qual=0x0
CD audio: SCSI command fault on /dev/rdsk/c0t0d0:
Opcode=0x15 Cdb_status=0x2 Sense_status=0x0 Key=0x5 Code=0x26 Qual=0x0
CD audio: SCSI command fault on /dev/rdsk/c0t0d0:
Opcode=0x15 Cdb_status=0x2 Sense_status=0x0 Key=0x5 Code=0x26 Qual=0x0
CD audio: SCSI command fault on /dev/rdsk/c0t0d0:
Opcode=0x15 Cdb_status=0x2 Sense_status=0x0 Key=0x5 Code=0x26 Qual=0x0
CD audio: SCSI command fault on /dev/rdsk/c0t0d0:
Opcode=0x15 Cdb_status=0x2 Sense_status=0x0 Key=0x5 Code=0x26 Qual=0x0
CD audio: SCSI command fault on /dev/rdsk/c0t0d0:
-------------------

Does anyone know about this error message ?

Thanks in advance

Radim

[Paula J Frazer-Campbell]

Hi
The TEAC CD-532E-B may not be supported, this may help

http://forums.itrc.hp.com/cm/QuestionAnswer/1,1150,0xc50360260cafd4118fef0090279cd0f9,00.html

Paula

[melvyn burnard]

You may want to check the website:

http://metalab.unc.edu/tkan/xmcd/config.html

for info on supported cd drives.
Having said that I believe if you check through the section on Configuration and Testing the Configuration, htere ius a section that appears to relate to the error you see, namely the opcode 15 (0x1a in hex) and suggests fixes for this.