Xserver

[SupraTeam]

Hello all,
i have a problem on my workstation B.10.20 A 9000/782.
The X server didn't mount , all external login are OK but an X local login is impossible !!!
The dtlogin process turn correctly

Help me !!!!

[Rick Garland]

The X server didn't mount? Is this an NFS mount or a local mount?

More info please?

[Robert-Jan Goossens_1]

Hi Durand,

run below command and check the error messages.

# dr_dt

Regards,
Robert-Jan

[SupraTeam]

No it's a services .... /sbin/rc3.d/S990dtlogin.rc

When the workstation boot she stops on Xservers error

[Rick Garland]

As stated, run the /usr/contrib/bin/X11/dr_dt
See what warnings/errors are present.

[SupraTeam]

I have a lot of warning about owner of /usr/dt
but i have messages in Xerror :
Fatal server error:
Couldn't open X pointer device! Is one attached?

^[gXIO: fatal IO error 232 (Connection reset by peer) on X server "hfla-cl1:0.0"
after 0 requests (0 known processed) with 0 events remaining.

Fatal server error:
Couldn't open X pointer device! Is one attached?

^[gXIO: fatal IO error 232 (Connection reset by peer) on X server "hfla-cl1:0.0"
after 0 requests (0 known processed) with 0 events remaining.

Thu Feb 10 16:21:38 2005
error (pid 1343): Server for display hfla-cl1:0 can't be started.

[Rick Garland]

CDE is very dependent on resolution. Make sure you have name resolution forward, bacwards up, down, sideways, etc...

[SupraTeam]

? what do you mean by "Make sure you have name resolution forward, bacwards up, down, sideways, etc"

[Rick Garland]

Name resolution - can you do nslookup commands?
By short name, FQDN, IP address, etc...

[SupraTeam]

nslookup is OK.
CDE is a local systeme.
After un reboot the X server didn't work

[Alex Glennie · Accepted solution]

try a different mouse.

[SupraTeam]

thank you Alex Glennie it's the mouse !!!!!