3par clx setup issue

[hpernedb]

Hi All,

I'm trying to setup serviceguard 11.20 with CLX extension on our new pair of 3par arrays; with not much success so far.

was hoping someone could shed some light into configuration/setup of the clx extension; so far i have:

0/ created lvm/lvol @ lun presented from 3par array

1/ downloaded & installed 3PAR CLX extension; configured /etc/opt/hpclx3par/conf/CLX3PAR.config with all required directives

2/ configured /etc/opt/hpclx3par/conf/UCF.cfg (pretty much same settings as above)

3/ created a package with clx/clxsg module enabled; added VG/FS settings;  applied package to my cluster

what i am missing is clxpmu-like utility known to EVA CLX people around; to define password for CLX operations.

results so far :

CLX doesnt communicate with 3par array; package is stuck in starting status and nothing happens.

any help much appreciated!

thanks.

Richard

[Dennis Handly]

Can you connect/manage the array using the HP 3PAR CLI?

[hpernedb]

I can connect to cli from both cluster nodes via ssh - using user/password that was provided to me for clx operations