Can not install SUSE on DL180 G6 with smart array P410

[Eriek Regandono]

Hi all,

Please help me
I can not install SLES 10 64bit on DL180 G6 with smart array P410
Error is no hdd found
I also try make diskate driver (http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=329290&prodSeriesId=3883890&swItem=MTX-07faf9d21ebc4f0986c2abd3f5&prodNameId=3883931&swEnvOID=2078&swLang=13&taskId=135&mode=3)
using raw write (windows) & linux dd
but the result is same SLES 10 can not detect my P410 smart array

Regards,
eriek

[Tim Nelson]

first thought,

did you configure the P410 disks ?
interupt with F8 when prompted during array startup

review the disk setup first, maybe no disk configured and hence the lack of drive to install OS to ?

I know that the newer redhat distros include the HP drivers, not sure if SLES does.

[Eriek Regandono]

Yes,
I was already configure the disk
1 x RAID0 (1disk)
4 x RAID5 (6disk)

[Eriek Regandono]

SUSE 10 have compaq cciss driver
I already load the driver from the installation menu
But, i think P410 is newer than the driver