Manoj,
Thank you for the response.
******************** NOT WORKING NODE ****************************
[root@mtstalpd-rac4 ~]# nslookup mtstalpd-rac3
;; connection timed out; no servers could be reached
[root@mtstalpd-rac4 ~]# nslookup mtstalpd-rac4
;; connection timed out; no servers could be reached
[root@mtstalpd-rac4 ~]# nslookup 10.157.120.196
;; connection timed out; no servers could be reached
[root@mtstalpd-rac4 ~]#
[root@mtstalpd-rac4 sysconfig]# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
10.218.22.192 0.0.0.0 255.255.255.224 U 0 0 0 bond0
10.157.120.128 0.0.0.0 255.255.255.128 U 0 0 0 bond2
10.157.63.0 0.0.0.0 255.255.255.0 U 0 0 0 bond1
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 bond2
0.0.0.0 10.157.63.1 0.0.0.0 UG 0 0 0 bond1
[root@mtstalpd-rac4 sysconfig]# ping 10.157.63.1
PING 10.157.63.1 (10.157.63.1) 56(84) bytes of data.
From 10.157.63.101 icmp_seq=1 Destination Host Unreachable
From 10.157.63.101 icmp_seq=2 Destination Host Unreachable
From 10.157.63.101 icmp_seq=3 Destination Host Unreachable
--- 10.157.63.1 ping statistics ---
4 packets transmitted, 0 received, +3 errors, 100% packet loss, time 3001ms
, pipe 3
[root@mtstalpd-rac4 sysconfig]# ping
www.yahoo.com[root@mtstalpd-rac4 sysconfig]# nslookup
www.yahoo.com;; connection timed out; no servers could be reached
[root@mtstalpd-rac4 sysconfig]#
******************************** WORKING NODE *************************
[root@mtstalpd-rac3 ~]# nslookup mtstalpd-rac3
Server: 10.217.255.161
Address: 10.217.255.161#53
Name: mtstalpd-rac3.nycnet
Address: 10.157.63.100
[root@mtstalpd-rac3 ~]# rac4
ssh: connect to host mtstalpd-rac4 port 22: No route to host
[root@mtstalpd-rac3 ~]# iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
[root@mtstalpd-rac3 ~]# cat /etc/nsswitch.conf
#
# /etc/nsswitch.conf
#
# An example Name Service Switch config file. This file should be
# sorted with the most-used services at the beginning.
#
# The entry '[NOTFOUND=return]' means that the search for an
# entry should stop if the search in the previous entry turned
# up nothing. Note that if the search failed due to some other reason
# (like no NIS server responding) then the search continues with the
# next entry.
#
# Legal entries are:
#
# nisplus or nis+ Use NIS+ (NIS version 3)
# nis or yp Use NIS (NIS version 2), also called YP
# dns Use DNS (Domain Name Service)
# files Use the local files
# db Use the local database (.db) files
# compat Use NIS on compat mode
# hesiod Use Hesiod for user lookups
# [NOTFOUND=return] Stop searching if not found so far
#
# To use db, put the "db" in front of "files" for entries you want to be
# looked up first in the databases
#
# Example:
#passwd: db files nisplus nis
#shadow: db files nisplus nis
#group: db files nisplus nis
passwd: files
shadow: files
group: files
#hosts: db files nisplus nis dns
hosts: files dns
# Example - obey only what nisplus tells us...
#services: nisplus [NOTFOUND=return] files
#networks: nisplus [NOTFOUND=return] files
#protocols: nisplus [NOTFOUND=return] files
#rpc: nisplus [NOTFOUND=return] files
#ethers: nisplus [NOTFOUND=return] files
#netmasks: nisplus [NOTFOUND=return] files
bootparams: nisplus [NOTFOUND=return] files
ethers: files
netmasks: files
networks: files
protocols: files
rpc: files
services: files
netgroup: nisplus
publickey: nisplus
automount: files nisplus
aliases: files nisplus
[root@mtstalpd-rac3 ~]# telnet 10.157.120.196 22
Trying 10.157.120.196...
Connected to mtstalpd-racm4 (10.157.120.196).
Escape character is '^]'.
SSH-2.0-OpenSSH_4.3
^]
Protocol mismatch.
Connection closed by foreign host.
[root@mtstalpd-rac3 ~]# telnet 10.157.63.101 22
Trying 10.157.63.101...
telnet: connect to address 10.157.63.101: No route to host
telnet: Unable to connect to remote host: No route to host
[root@mtstalpd-rac3 ~]# ping -s 128 mtstalpd-rac4
PING mtstalpd-rac4 (10.157.63.101) 128(156) bytes of data.
From mtstalpd-rac3 (10.157.63.100) icmp_seq=2 Destination Host Unreachable
From mtstalpd-rac3 (10.157.63.100) icmp_seq=3 Destination Host Unreachable
From mtstalpd-rac3 (10.157.63.100) icmp_seq=4 Destination Host Unreachable
--- mtstalpd-rac4 ping statistics ---
7 packets transmitted, 0 received, +3 errors, 100% packet loss, time 6000ms
, pipe 3
[root@mtstalpd-rac3 ~]#
[root@mtstalpd-rac3 sysconfig]# nslookup
www.yahoo.comServer: 10.217.255.161
Address: 10.217.255.161#53
Non-authoritative answer:
www.yahoo.com canonical name = fp.wg1.b.yahoo.com.
fp.wg1.b.yahoo.com canonical name = any-fp.wa1.b.yahoo.com.
Name: any-fp.wa1.b.yahoo.com
Address: 67.195.160.76
Name: any-fp.wa1.b.yahoo.com
Address: 69.147.125.65
[root@mtstalpd-rac3 sysconfig]#
*********************************************
