HBA on LINUX Red Hat U4 AS

[Antonio_137]

Hello there,
I have a customer running Red Hat Linux U4 AS on a Proliant DL360 G5 and connected to an EVA8000 via an Emulex LP10000 HBA,how can I see,on the Linux operative system,the driver and firmware version of the HBA...??
Thanks.

[Matti_Kurkela · Accepted solution]

Each SCSI storage device, including the FC HBAs, will have its own sub-directory at /sys/class/scsi_host, named like "host*".

For Emulex HBAs, this directory will contain a lot of information about the state of the HBA. For example, the firmware revision of HBA 0 can be viewed with:

cat /sys/class/scsi_host/host0/fwrev

To identify the driver version, run:
modinfo lpfc | grep version

MK

[Antonio_137]

Thank you very much.
Regards