how to check HBA status in Linux 4.6

[laiju.c.babu]

Hi Team,

I have RHEL 4.6 and we configured multipath on it . Now some of the paths are showing as failed .

I want  to check the HBA status now.

In HpUx  I know i can do this by ioscan -fnC fcd and using fcmsutil...

Now in Linux i got some work around

1) Check the host id of that particular device using

ls -l /sys/block/sdas/device

2) If my host id is 5

cat /sys/class/scsi_host/host5/state

I did like this .. Could you please tell me what i did is correct or any other modification is required . If any one knows some good options please let me know ...

For your information we are using Emulex card so we have lpfc

Regards

Laiju C  Babu