HPE Community
Operating System - Linux
1828017 Members
1924 Online
109973 Solutions
New Discussion

Re: how to create mpath1 file without server reboot?

 
Sys55
Occasional Visitor

‎07-25-2011 05:39 AM

‎07-25-2011 05:39 AM

how to create mpath1 file without server reboot?

Hellow forum,


Which command on linux is used to create the /dev/mapper/mpath1 file?


I have connected the linux server (RH el5.4) to the eva with 2 fiber, and installed the HP device mapper.
However I have notice that only after reboot the /dev/mapper/mpath1 file is created. ( I repeated the test several times and the multipath is working fine)


Is there a way to create the mpath1 file without rebooting the server?

 

Thank you.

0 Kudos
Reply
1 REPLY 1
Naj
Valued Contributor

‎07-25-2011 05:49 AM

‎07-25-2011 05:49 AM

Re: how to create mpath1 file without server reboot?

Hi

Please refer
http://h30499.www3.hp.com/t5/System-Administration/Installing-multipath-for-RHEL-5/m-p/4143413#M31617

____________________________________________
:: Really appreciate if you could assign some points.
:: Don't know how to assign point? Click the KUDOS! star!
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.