HPE Community
Operating System - Linux
1827295 Members
3799 Online
109717 Solutions
New Discussion

HP DL140 Redhat EL Raid1 boot problem

 
bzr
Occasional Contributor

‎11-10-2005 06:15 PM

‎11-10-2005 06:15 PM

HP DL140 Redhat EL Raid1 boot problem

Hi people,
I need help to install redhat enterprise linux 4 on HP DL140 G2 with software raid.

After installing soft, it hangs on:
Grub Loading stage1.5.
Grub Loading,please wait...
Error 15

Please, kindly advise a detailed guideline to solve this use.

Any help appreciated,
Kind regards.
0 Kudos
3 REPLIES 3
Kodjo Agbenu
Honored Contributor

‎11-10-2005 07:02 PM

‎11-10-2005 07:02 PM

Re: HP DL140 Redhat EL Raid1 boot problem

Hi,

This thread may be helpful :

http://forums.gentoo.org/viewtopic.php?t=122656

Good lcuk.
Kodjo
Learn and explain...
0 Kudos
bzr
Occasional Contributor

‎11-10-2005 07:20 PM

‎11-10-2005 07:20 PM

Re: HP DL140 Redhat EL Raid1 boot problem

Thanks for reply,

Any idea about how grub should be configured to see the raid device (/) ? Raid support is on kernel but as module

Thanks,

0 Kudos
Ivan Ferreira
Honored Contributor

‎11-10-2005 10:39 PM

‎11-10-2005 10:39 PM

Re: HP DL140 Redhat EL Raid1 boot problem

Where are detailed steps to use software raid with grub.

http://www.linuxsa.org.au/mailing-list/2003-07/1270.html

If you cannot boot, you should ensure that the initial ram disk have the md module in it.

mkinitrd --preload raid1 --with=raid1 /boot/initrd-.img
Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.