HPE DL385 Gen10 Plus HW prometheus exporter

[Fl1nt]

Hi everyone!
I'm currently looking to monitor my nodes temperatures and power consumption through our monitoring platform (prometheus/grafana) and I'm having some issues with the node_exporter as it reports 0 power consumption where it should be around 400W according to the iLO power interface.

Do you use node_exporter to do that and if so, do you have specific HPE settings?
If not using I'd like to know if a HPE_NODE_EXPORTER exist? I don't want to use the blackbox_exporter that would then just contact the iLO interfaces.

Weird thing is, CentOS on such HPE node isn't populating any /sys/class/power_supply hook which is used by node_exporter, it works with an equivalent DELL or Supermicro server so did I missed something? Do I need to install hp-health ?

[Fl1nt]

Anyone have any ideas or suggestions?

[sudhirsingh]

Hi,

Try to install Centos management component pack and check if it help

https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_11c5369e27b74c1f8ab06f9aac

Regards,

Sudhir