HPE Community
Operating System - Linux
1834804 Members
3035 Online
110070 Solutions
New Discussion

instructions to modify the binding order of LANs

 
Sanjay Govind
New Member

‎12-09-2003 07:35 PM

‎12-09-2003 07:35 PM

instructions to modify the binding order of LANs

Hi,

Is there any steps that can be followed for user to modify the binding order of the LAN cards, when there are more than one LAN card configured on the server.
OS : Linux advanced Server 2.1
0 Kudos
Reply
1 REPLY 1
Stuart Browne
Honored Contributor

‎12-10-2003 09:45 AM

‎12-10-2003 09:45 AM

Re: instructions to modify the binding order of LANs

The reference to 'eth0' (etc.) is hwo they are referenced by the entries in '/etc/modules.conf'.

If you've got multiple of the same type of card in the system however, you will have greater difficulty.

You ahve to individually address the cards using whatever flags the driver for that make of card allows (use 'modinfo', and see what options you've got).

If it's the latter, if you could provide some more details of your machine's hardware, and the details from '/proc/ioports'.
One long-haired git at your service...
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.