listing the TCP/IP configuration

[Norman_21]

Could anyone advise what's the command in HP-UX that will work like ipconfig/all in MS-Windows, to show the NICs as well as TCP/IP Current Configuration assigned to each NIC.

Thnx

[Stuart Browne · Accepted solution]

Look at the 'ifconfig -a' command.

You might also want to look at the routing table ('netstat -nr'), and possibly the DNS configuration ('cat /etc/resolv.conf').

Whilst the commands I've written are things I'd use under Linux, they should also work for HP-UX.

You might want to ask in the HP-UX forums next time however.

[I_M]

Hi

On HP-UX,
ifconfig lan0

On Linux
ifconifg eth0

see " man ifconifg " for more information.

Good luck

[Tony Lowrie]

netstat -an (Show all TCP/IP Connections)

Double check /etc/services to cross check the output from above.

find a utility called lsof, it shows more detailed TCP/IP info.

[Balaji N]

Hi,

Try "netstat -i" or "netstat -ni".

HTH
-balaji

[Norman_21]

There is a script from Yogeeraj in a different thread under HP-UX. Check it out!
Thanks to everyone