Mondo Restore Cannot See NICS

[Craig Johnson_1]

I made an image of a DL380 G6 that I built from scratch, SLES 11 SP1, because when I tried a G5 image on it Mondo couldn't see the NICS.

Well, now this G6 image is doing the same thing on another G6 I want to clone. I get an SIO error and "eth0 not found"

What's really odd is that the bnx2 driver is loaded, which is what the built G6 uses. What am I missing/doing wrong?

[Craig Johnson_1]

An update. I booted from another, older boot iso and was able to activate networks. What would cause the boot iso that I'm creating at SLES 11 SP1 to not include the proper networking support?

[Alzhy]

Suggest you open a case at mondorescue.org -- the guys there are responsive.

Dl380 G6 here too BUT running Redhat 5.X -- zilch issues .

[Craig Johnson_1]

I should have responded to this long ago. The key was to install the beta version of Mindi for SLES 11.

mindi-2.0.7.6-0.20110128002916.sles11.x86_64.rpm