Operating System - Linux
1829376 Members
2389 Online
109991 Solutions
New Discussion

NIC Failure - nv_stop_tx: TransmitterStatus Remained Busy

 
Todd Christopher Hamilt
Occasional Contributor

NIC Failure - nv_stop_tx: TransmitterStatus Remained Busy

My NIC failed with the follow messages after work for many hours. The messaes is:
divert: allocating divert_blk for eth0
eth0: forcedeth.c: subsystem: 0103c:1500 bound to 00:0a.0
divert: freeing divert_blk for eth0
divert: allocating divert_blk for eth0
eth0: forcedeth.c: subsystem: 0103c:1500 bound to 00:0a.0
eth0: no link during initialization.
eth0: link up.
NETDEV WATCHDOG: eth0: transmit timed out
nv_stop_tx: TransmitterStatus remained busy<7>eth0: tx_timeout: dead entries!
NETDEV WATCHDOG: eth0: transmit timed out
nv_stop_tx: TransmitterStatus remained busy<7>eth0: tx_timeout: dead entries!
2 REPLIES 2
SP.PALANIAPPAN
New Member

Re: NIC Failure - nv_stop_tx: TransmitterStatus Remained Busy

Hi,

Have u confirmed nic is physically working in other machine by swapping.

regds&thx,
palani.SP.
Alpha977
Valued Contributor

Re: NIC Failure - nv_stop_tx: TransmitterStatus Remained Busy

Hello!

Try to ping yourself ip (not loopback)
Then, try the NIC into other machine.