No output from video card - Kayak XA

[Colin McFarlane]

After rebooting this morning (W2K OS) monitor does not recieve signal from Kayak-XA. Tested Monitor(IBM P202) on Laptop every thing fine. if any one has any suggestions on how to trouble shoot this problem would be greatly appriciated.
Cheers
Colin

[HGN]

Hi

No display can be a problem with either the video display or the power supply unit.Is the PC booting can you hear the hard drive making the noise to get booted if not the problem lies on the motherboard mostly.

Rgds

HGN

[Steven E. Protter]

If video is not on the mb, try a different video card. If video is on the motherboard, try and add in video card or get the kayak serviced.

In this case, the fact that this is a Linux forum does not seem relavent to resolution.

SEP

[Colin McFarlane]

Thanks for the help SEP and HGN, after researching the Beep Codes (1 long 2 short) indiccating Video configuration failure, and with your suggestions we will be replacing the video card.

Cheers and sorry about putting this thread in the linux forum.

Cheers

Colin

[Steven E. Protter]

Colin,

Since this is your first post, please consider assigning points to my colleagues post. Its a little rewards system that makes itrc fun.

0 will do for me.

Good Luck.

I pointed out your call was misplaced simply so next time you get it to a place where you'll get more help. I'm a windows imparied Unix geek.

Thanks.

SEP

[Colin McFarlane]

Thanks SEP and HGN, I replaced video card and all is fine.. points ... I don't know how to assign them ...but what ever the max limit is ...you both should recieve them.
Cheers

Colin