Oracle RAC on Red Hat an HP Visrtual Array

[Tonatiuh]

Anyone who has some turorial or can explain step-by-step (including detailed syntax of the commands), on how to configure the HP Storage Works Virtual Array for a Cluster using Oracle Clusterware 9i r2 with Red Hat Linux AS 3.0 ?

THANKS!

[Hein van den Heuvel · Accepted solution]

Are we talking EVA5000 or EVA3000 here?

I'm afraid that is too generic a question to deal with. For starters, there are no commands... you are supposed to use a GUI. (Admittedly there is a scripting option, but IMHO that is a next step, after understanding the GUI and general setup.

Have you checked the HP web site and drilled down to 'storage'... enterprise... technical ... looked for linux?
You'll find documents that should get you going like:
http://h200001.www2.hp.com/bc/docs/support/SupportManual/c00192395/c00192395.pdf

The Oracle (OTN, metalink) web sites have lots of documents on RAC.

The REDHAT website has some interesting details, like:
http://www.redhat.com/f/pdf/rhel/WHP0007USOracle10g.pdf
(hint: www.bugmenot.com)

And you may want to check teh HPworld 2004 sessions. There was a pretty good linux/10g handson which should be valuable for 9i as well.

Good luck,
Hein.

[Ian Derringer]

How about MSA1000 series?

[NiCK_76]

Hi Tonatiuh ,

Below URL contain ORACLE install information.

http://www.oracle.com/technology/tech/linux/install/index.html

NiCK