HPE Community
Operating System - Linux
1830212 Members
1412 Online
109999 Solutions
New Discussion

Re: Performance issue

 
Shakeer_1
Occasional Advisor

‎04-15-2005 01:37 AM

‎04-15-2005 01:37 AM

Performance issue

One of my superdome partition is allocated with single cpu. The CPU utilization is hardly 2%, implies CPU is 98% idle. My concern is the load average is always 4 or so. i did some diagnostic and found 4 or 5 processess always in run queue and hence the CPU load. Further to tune the performance need some inputs. Also do i get a performance tuning guide for HP-UX 11.11? Thanks in advance your response is appreciated.

Shakeer.
0 Kudos
Reply
3 REPLIES 3
Dave Falloon
Trusted Contributor

‎04-15-2005 09:36 AM

‎04-15-2005 09:36 AM

Re: Performance issue

Are the processes hung? ie. running a stat() on a failed NFS drive?

Or are working properly and justifiably in a run state?

What processes are constantly running?

Is this a linux box or hpux box?

--Dave
Clothes make the man, Naked people have little to no effect on society
0 Kudos
Reply
Stuart Browne
Honored Contributor

‎04-15-2005 11:52 AM

‎04-15-2005 11:52 AM

Re: Performance issue

And what OS do you have running in the partition? I'm guessing HP-UX yes? In which case, wrong forum family ;)
One long-haired git at your service...
0 Kudos
Reply
Shakeer_1
Occasional Advisor

‎04-17-2005 11:07 PM

‎04-17-2005 11:07 PM

Re: Performance issue

Yes guys this is related to HP-UX, by mistake the ball is flung in to the wrong playground. Sorry for that..:)thanks for the support.

Cheers
Shakeer
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.