HPE Community
Operating System - Linux
1828359 Members
3081 Online
109976 Solutions
New Discussion

Re: Poor network performance using the builtin ethernet adapter in nx6325

 
Johan Gill
New Member

‎06-18-2007 02:46 AM

‎06-18-2007 02:46 AM

Poor network performance using the builtin ethernet adapter in nx6325

I have 32-bit Fedora Core 6 installed on an nx6325 laptop. It works OK until I load the NIC with about 250 Mbit/s (sent from elsewhere), at which point packets seem to be lost or corrupted. Is it the same on Windows too, or is it a Linux issue?
0 Kudos
Reply
1 REPLY 1
Court Campbell
Honored Contributor

‎06-18-2007 06:25 AM

‎06-18-2007 06:25 AM

Re: Poor network performance using the builtin ethernet adapter in nx6325

try

# service iptables stop

then retry. I have noticed slow down speeds using certain p2p apps. IF that resolves the issue you may create a rule of just disable iptables. If you continue to use iptables then you might look into installing firestarter. You can install it via yum. It's a nice graphical app for managing the firewall.
"The difference between me and you? I will read the man page." and "Respect the hat." and "You could just do a search on ITRC, you don't need to start a thread on a topic that's been answered 100 times already." Oh, and "What. no points???"
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.