HPE Community
Operating System - Linux
1833552 Members
3313 Online
110061 Solutions
New Discussion

Print spools but doesn't print

 
SOLVED
Go to solution
Vernon Brown_4
Trusted Contributor

‎08-04-2005 02:38 AM

‎08-04-2005 02:38 AM

Print spools but doesn't print

After upgrade from FC3 to FC4, applications spool up print jobs but they don't pring. FC3 worked fine out of the box so I never got into the printer configuration tools, and haven't been able to find them so far.

Printer is HP 7300 series, on USB port of HP Pavilion 7965.

Thanks for any clues !!
0 Kudos
Reply
2 REPLIES 2
Ivan Ferreira
Honored Contributor

‎08-04-2005 03:13 AM

‎08-04-2005 03:13 AM

Solution

Re: Print spools but doesn't print

If you use CUPS, you can use the

system-config-printer

command to verify printer configuration, o in a browser type in:

http://localhost:631

Use the /usr/bin/accept and /usr/sbin/enable commands to enable the printer and the spooling directory.

Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?
Reply
Vernon Brown_4
Trusted Contributor

‎08-04-2005 03:42 AM

‎08-04-2005 03:42 AM

Re: Print spools but doesn't print

Thanks; problem was default setup as series 4. Printer is series 1.

Works fine now !!
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.