PXE install of Debian 10 fails with "no network interfaces found" - SY 480 Gen10 1

[nam-shub]

PXE install of Debian 10 fails with "no network interfaces found" - SY 480 Gen10 1 - on Legacy BIOS

DHCP works fine at the start of PXE boot, but for some reason get this error....

[!] Configure the network

No network interfaces detected

No network interfaces were found. The installation system was unable to find a network device. 

You may need to load a specific module for your network card, if you have one. For this go back to the network hardware detection step.

Any advice?

[VPR1]

Good Day..!!

"Proxmox is not s upported OS in the sense that HPE has not tested this OS or provides drivers etc. The customer could try to manually load any of the other available linux drivers for the CNA card."

Below OS supported list for Sy 480 Gen10

--

Windows Server 2012 R2 with persistent memory drivers from Hewlett Packard Enterprise

Windows Server 2016 with persistent memory drivers from Hewlett Packard Enterprise

Windows Server 2019

Red Hat Enterprise Linux 7.6

Red Hat Enterprise Linux 8.0

SUSE Linux Enterprise Server 12 SP4

SUSE Linux Enterprise Server 15 with SUSE-SU-2019:0224-1 kernel update

SUSE Linux Enterprise Server 15 SP1 with SUSE-SU-2019:1550-1 kernel update

VMware vSphere 6.7 U2 + Express Patch 10 (ESXi670-201906002) or later (supports App Direct and Memory modes)

VMware vSphere 6.5 U3 or later (supports Memory mode.

-For 4820c CNA below linux drivers provided

--

https://support.hpe.com/connect/s/search?language=en_US#q=HPE%C2%A0%20Synergy%204820C%2010%2F20%2F25Gb%20CNA&t=DriversandSoftware&sort=relevancy&layout=table&numberOfResults=25&f:@kmswtargetbaseenvironment=[Red%20Hat]

Regards,

Vijaya