SCO 5.0.7 Adaptec 2610SA, Problem... (my english very bad)

[B. Lampe]

--------------------------------------------------------------------------------
Hi,
i have a problem with a ProLiant Ml110 and an Adaptec 2610SA Controller. The OS was SCO 5.0.7 (fresh installation). After booting the CD I loadet the driver aaraid with "defbootstr link=aacraid". After the driver was installed from the floppy the new Hardware List appears - but there was allways the error message: no boot controller. Have I make a mistake? The Controller ist a array with 236 Volume.
Sorry - my english is very bad, but I hope, you unterstand my problem

[Stuart Browne]

http://www.adaptec.com/worldwide/support/driverdetail.jsp?sess=no&language=English+US&cat=%2FOperating+System%2FSCO+Unix&filekey=aacraid_drv_sco-5.06-5.07img_7348.ZIP

Is this the driver you used? And is the Adaptec controller '21610SA' ?

[B. Lampe]

Yes. I try it with this driver. I try since 2 days. I was hopefull, that you can help me.

[Stuart Browne]

*shakes head* sorry, I've never tried using OSR with a SATA device. It should work, but *shrug*.

I suggest you either talk to Adaptec support, or to some guy's who have more OSR experience (news groups, comp.unix.sco.misc).

[B. Lampe]

Yes ok. One little question. The Controller was found on PCI BUS 2, DEV 3, FUNC 0. Can I give some parameters with the defbootstr? Adaptec do not give any answer, because the Controller was a OEM.
But thank you for trying.

[B. Lampe]

Sorry. My mistake.The controller was not a 21610. It was a 2610.

[Stuart Browne]

Well, if it's not a 21610, then I doubt that driver will work (given that HP offer no SCO driver, nor do adaptec), so..

Combine that with the inability to find an OSR driver for a '2610SA' on the 'net at all, the outlook is grim.

[B. Lampe]

Thank you. Then I must send a call to HP. Because the Server was sco zertifiziert.
Thank you and have a nice day!

[Stuart Browne]

The server might be, but that controller isn't.

Incidentally, the ML110 isn't SCO (either OpenServer or Unixware) certified:

http://h10018.www1.hp.com/wwsolutions/sco/index-all.html

[B. Lampe]

hmmm...
http://h10010.www1.hp.com/wwpc/de/de/sm/WF06a/135-141-374575-374575-12083615-12151604.html
May be, that it was only a problem with the controller

[Stuart Browne]

*whistle* conflicting information.. interesting.. ;)

Yea, hastle HP.

[qinzhi]

I bought a Poweredge 830 server in Nov.2005. It is also using a Adaptec 2610sa raid control card with 2 maxtor 160GB hard disk. I want to install SCO Open Server 5.0.5. I asked Dell technical support for driver. They gave me AD2810sa for SCO Open Server 5.0.7 driver instead. I'm very lucky. It works. I tried to disconnect one of those hard disk. The server kept making a very loud alarm, but the systerm was still working. Here is the string I'm using "defbootstr link=aacraid" while installing. Here is the link to download a floppy image of the driver. http://download.adaptec.com/raid/aac/aacraid_drv_openserv_506-507_b7370.tar.gz