DL360 Gen10 new install Server 2022

[werner.zeller]

Hi, I installed a server DL360 Gen10 with the ms server std 2022 with Provisioning (F10). After setting the Partitioning it started the copying process. After a short time it comes with a window "Die Microsoft-Software-Lizenzbedingungen wurden nicht gefunden." it stops .  How can I go further without setting the Key?

Best regards

werner

[ksram]

Hi,

Good day!

Thank you for the Post.

If you are using S100i Controller, we would request you to follow the article to resolve the issue : https://support.hpe.com/hpesc/public/docDisplay?docId=a00036381en_us

The Driver mentioned on the above article can be downloaded from : https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_94ecae7363534a82b939888db5#tab-history

(Always download the latest Driver checking the revision history)

Also you may try updating the Intelligent Provisoning and check.

Thank you
RamKS