Firmware and Driver Update for HPE Broadcom NX1 Online Firmware Upgrade Utility for Windows Serve

[Captain_Morgan]

I have a question regarding the installation of the drivers and firmwares, for:

• hp Ethernet 1Gb 4-Ports 331FLR. 
• hp Ethernet 1Gb 4-Ports 331i. 

they are outdated and must be updated manually so my question is:

I would like to install the latest versions compatible for windows server 2012 R2, do i need to install all the previous versions of driver and firmware as well? or only the latests? 

thanks in advance, cheers!

[sudhirsingh]

Hi,

You can update the latest firmware /driver.

However, please do check firmware/driver release notes to know which version driver/firmware is supported.

e.g.,

For the driver version 214.0.0.4 (17 Jul 2020) the supported firmware should be version 5.2.3.0 or later

HPE Broadcom NX1 1Gb Driver for Windows Server x64 Editions
https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_cbfcf8f837c34a439039f2e5b4&swEnvOid=2000150#tab3

Important:
HPE recommends the firmware provided in HPE Broadcom NX1 Online Firmware Upgrade Utility for Windows Server x64 Editions, version 5.2.3.0 or later, 
for use with this driver.

Regards,

Sudhir