Operating System - Microsoft
cancel
Showing results for 
Search instead for 
Did you mean: 

how to into setup the BIOS of an ancient PC Vectra QS/20?

 
Highlighted
New Member

how to into setup the BIOS of an ancient PC Vectra QS/20?

We have computer of HP Vectra QS/20.When I power on the PC,Monitor will display "invalid configuration information-run SETUP program",but I don't how to into SETUP.

Could anyone help me with this problem. I still intend to use this computer.

thanks in advance
5 REPLIES 5
Highlighted
Honored Contributor

Re: how to into setup the BIOS of an ancient PC Vectra QS/20?

isn't it by pressing "Delete" key or F9/F10?
Highlighted
Honored Contributor

Re: how to into setup the BIOS of an ancient PC Vectra QS/20?

does that work?
Highlighted
New Member

Re: how to into setup the BIOS of an ancient PC Vectra QS/20?

I try press F1~F12 and DEL,but not to work
Highlighted
Honored Contributor

Re: how to into setup the BIOS of an ancient PC Vectra QS/20?

Hi,
You can try pressing tab when the Compaq logo appears, then you will see the post messages, it may be listed there.

What may work to find out is to remove one memory bank if you have more then one. then it has to save the new settings and the keys will be listed at the bottum (is a long shot)

I also thought is was F10

have a nice day,
HTH, Ronald
The logic of Microsoft: "Press START to shut down the pc"
Highlighted
Esteemed Contributor

Re: how to into setup the BIOS of an ancient PC Vectra QS/20?

Try removing the CMOS battery. Leave it out for at least half an hour, before you pop it back in. This will have the effect of setting the BIOS back to the defaults, andmay solve your problem.
If the computer is really old it may need a new battery.
---++++Only read the manual as a last resort++++---.