This widget could not be displayed.
1845516 Members
2555 Online
110244 Solutions
This widget could not be displayed.
This widget could not be displayed.
This widget could not be displayed.
This widget could not be displayed.
This widget could not be displayed.
This widget could not be displayed.
This widget could not be displayed.
New Discussion
This widget could not be displayed.
This widget could not be displayed.

Re: Powersave LJ4550EN

 
Rudi Tolleneer
New Member

Powersave LJ4550EN

It's impossible to configure the powersave-option on this printer. It seems to be blocked.
The printer is installed locally.
Every time I select another time-limit ... it changes back to the original setting.
What can be the problem?
3 REPLIES 3
Deeble Tonkin
Regular Advisor

Re: Powersave LJ4550EN

Hi
After selecting the time limit with the plus and minus keys you need to press the select key to save the new value. A * will appear next to the new value.
Rudi Tolleneer
New Member

Re: Powersave LJ4550EN

Hi,
I knew that, but that doesn't help ... you selct the value and it comes back to the original value ...
Deeble Tonkin
Regular Advisor

Re: Powersave LJ4550EN

Hi
Try a 'cold reset'. Hold down the green 'go' button while powering on until message displayed on panel 'cold reset.
This clears all printer settings so print a config first. Network settings can be preseved by removing jet direct card prior to reset.