Proliant ML350 Gen10 Intelligent Provisioning fails installing Windows 2019 Rok

[AndreaRossi]

I'm simply trying to install Windows 2019 Rok (italian language) on a ML 350 Gen 10 (sa is P408i-a) via Rapid Deployment. The installation procedure accepts the iso image from usb; it seems to succeed partitioning and copying files; but as it reboots, Windows OS boots, a screen with a cmd appears for a moment, then it reboots again in a endless loop. 

No difference after all firmware were updated to SPP 2022 03,.  

[support_s]

System recommended content:

1. HPE ProLiant Gen10 Servers - Installation of Windows 2016 or 2012 Using Intelligent Provisioning in Gen10 Fails at the Execution of hpssbem.exe

2. Advisory: HPE ProLiant Gen10 Servers - Installing Microsoft Windows Using Intelligent Provisioning Rapid Setup Tool May Fail if the Hard Disk Drives Are Located on SAS Port 2 of the Smart Array SR Gen10 Controllers

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[AmRa · Accepted solution]

Have you tried installing OS directly with OS media and without Intelligent Provisioning?
If yes, what is the result of OS installation?

[AndreaRossi]

Yes

This is how I solved; install from Windows media and then add drivers from psp.

I suppose there should no difference or outcome, isn't it?  

[AmRa]

Yes, you are right there is no difference.

When OS installation done through Intelligent Provisioning, it automatically install driver and HPE software.

however when OS deployed through direct OS media, the driver and HPE software need to install manually through SPP.