HPE Community
Operating System - Microsoft
1827293 Members
2510 Online
109717 Solutions
New Discussion

Re: Quick Launch buttons issue - no longer work

 
Antriksha Somani
New Member

‎09-24-2010 05:15 AM

‎09-24-2010 05:15 AM

Re: Quick Launch buttons issue - no longer work

Removing battery and placing it again worked for me.
0 Kudos
Topsie3v
New Member

‎03-22-2011 10:24 PM

‎03-22-2011 10:24 PM

Re: Quick Launch buttons issue - no longer work

Abt 3 yrs ago when my DV6211TX was new I had this problem and was told to try this below which works
Unplug the AC power and remove the battery. Hold down the power button for 30 seconds then reinstall the battery and plug in the Ac power.
Press the start button and at the same time slowly tap F10, when the window opens press F9 and then enter, then F10 again and OK.
This should fix the problem for a while. I have followed this a few times since
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.