Operating System - Microsoft
cancel
Showing results for 
Search instead for 
Did you mean: 

"Machine is not in committed state "

 
Highlighted
New Member

"Machine is not in committed state "

After 6930p mainboard change , Notebook gives a warning message at the beginning that "Machine is not in committed state "and in bios setting the AMT Options is greyed so we cant make any changes, how can I solve this problem
14 REPLIES 14
Highlighted
Honored Contributor

Re: "Machine is not in committed state "

Is this a CAS issue?
Highlighted
New Member

Re: "Machine is not in committed state "

CAS issue means?
Highlighted
Honored Contributor

Re: "Machine is not in committed state "

you posted your question to the Client Automation Standard (CAS) forum!

Is the issue you see related to CAS software? If not, you have the wrong forum.
Highlighted
New Member

Re: "Machine is not in committed state "

My problem is to obtain "AMT Enabling tool" ,in forums I read that after using this software the warning message will be lost , Although one of the forum user gives a link for this patch , forum admin erase the link
thanks
Highlighted
Honored Contributor

Re: "Machine is not in committed state "

Highlighted
New Member

Re: "Machine is not in committed state "

thanks for your interest

I use the patch but there is error message as shown below;
error (8193) Intel ME Interface :Cannot locate ME Device driver
Highlighted
New Member

Re: "Machine is not in committed state "

do you know another tool for this subject in the forum I read in another forum that there is USB tool exist and some of the problem owner solved this problem
Highlighted
Acclaimed Contributor

Re: "Machine is not in committed state "

Highlighted
Advisor

Re: "Machine is not in committed state "

After replace the motherboard you will appears this error message Machine is not in committed state "
you can remove this error msg following steps

1) Download this file using this link
http://rapidshare.com/files/358146671/AMT_brand_tool.rar.html


2) then create a bootable usb pen drive or
floppy disk and run when your booting
your note book

3) now its very easy to remove in the dos
mode,

4) in the dos mode press dir then you will
be able to see more types of tools and
exes.
5) now you can see AMT BRAND TOOL, Run this
tool ..

6) after you run this it will
automatically restart.. then you want be
able to see that error msg
thnak you..