Windows 2008 SBS and Proliant ML115

[Fabio85]

Hi to all. I have a problem with my new Proliant ML115. I install Windows 2008 SBS SP2, all ok with no problem.

But after some hours, the server disconnect from the LAN. Appear the classic little yellow triangle over the symbol of the LAN near the watch.

I exclude for security all network peripherals for strange DHCP packet on the LAN, but nothing. The server do this thing also connect alone at a single switch :-(

So strange problem... Anyone can help me?

Thank you very much...

[Anuar Obregón]

Hi Fabio.

Can you check Event Viewer on system log and tell us if you see something unusual when this happens?

[Erdogan Temur]

Hi,

fw update and reinstall network driver.

HP NC-Series Broadcom Online Firmware Upgrade Utility for Windows Server 2003/2008 x64 Editions
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3683705&swItem=MTX-9638501f2bd8499a8c81e34690&prodNameId=3683706&swEnvOID=4037&swLang=8&taskId=135&mode=4&idx=1

HP NC-Series Broadcom 1Gb Driver for Windows Server 2008 x64 Editions
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3683705&swItem=MTX-d51437eac519467cb38ec59b02&prodNameId=3683706&swEnvOID=4037&swLang=8&taskId=135&mode=4&idx=1

This is how we thank each other in the forum

http://forums11.itrc.hp.com/service/forums/helptips.do?#33

Regards.

[Fabio85]

I just download these files yesterday, but nothing.

And in the event viewer nothing of interesting.. :-(

I think I'll change model of server... For example with its little brother ML110 I haven't got any problem, never!

Thank you to all for your availability and help!!

[Anuar Obregón]

Maybe it's something external.

Have you checked patch cord and switch port/appliance?