Windows server 2016 installation could not start installing on HP DL380 G10 Server

[Ermi]

Hallo everyone,

I have DL380 G10 server which I'm trying to install windows server with intelligent provisioning. I create logical drives with RAID Configuration. When I try to install windows, it could not start installing. I tried different windows ISO files but still not start installation. Anyone could help me please? 

[support_s]

System recommended content:

1. Installing and upgrading HP Insight Management 7.6 on Windows Server 2016 Failover Clusters

2. HPE OneView 7.0 User Guide for VMs | Install IIS Web Server on Windows Server 2008, Windows Server 2008 R2, Windows Server 2012, and Windows Server 2016

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[Anu_K]

Hello Ermi,

You could refer to the following video which shows the step by step procedure to install OS using Intelligent Provisioning : https://support.hpe.com/hpesc/public/videoDisplay?videoId=vtc00000211en_us

Also, if you are using S100i controller to create RAID and install OS you need to enable software RAID and manullay inject the S100i drivers for the server to find the logical drives.You may refer to following two videos for instructions on this:

How to Enable Software RAID on Gen10 Servers: https://support.hpe.com/hpesc/public/videoDisplay?videoId=vtc00000295en_us

Manually Injecting S100i SR Gen10 Array Controller Driver during Windows OS Installation: https://support.hpe.com/hpesc/public/videoDisplay?videoId=vtc00000294en_us

Hope it helps!