DS20E, KZPAC with SWCC Query

[Rob Buxton]

Hi All,

I'm in the process of converting a DS20E that was running Tru64 to run OpenVMS.
I've replaced the KZPCC with a KZPAC, configured the disks etc. and got VMS 7.2-2 installed.
This Server is intended for DR, so at this point I'm just proving it can be done.
I don't have a VMS Base or VMS User license as yet.

I'm relatively familiar with SWCC, I use it to interrogate our EMA1200 via NT and HSD's on VMS.

But, I cannot get the SWCC to talk to the new KZPAC/RA200 based array.
I've installed CCAGENTRA200 V2.2-503, and configured it using the RA200Config command procedure.

It seems to have created 3 new TCPIP Services, CCAGent, SPAGENT2, and SPGUI. All are Set NoListen, all are Disabled.
The CCAgentRA200 Process is up and running.

I've installed the RA200 Client on my Workstation, If I try and connect using SWCC it just reports no Agent is available on the Server.

Any clues to any tasks I've missed or that need additional setting up.

[Ian Miller.]

Did you do SYS$MANAGER:SWCC_CONFIG?

[Rob Buxton]

Ian,
Sorry, I missed the reply.
I have run the RA200Config which adds the Clients etc.
The Agent seems quite different from the SWCC Agent for the HSD I have on VMS in that it creates TCPIP Services but doesn't seem to use them.
I guess I could pull a disk and see if it catches the alerts!