HPE Community
Operating System - OpenVMS
1825805 Members
2110 Online
109687 Solutions
New Discussion

Re: PRODUCT UNDO and need to reboot afterwards...

 
SOLVED
Go to solution
John Koska
Advisor

‎02-13-2007 06:06 AM

‎02-13-2007 06:06 AM

PRODUCT UNDO and need to reboot afterwards...

OpenVMS 7.3-2 on GS160 Model 16.

Recently installed UPDATE9 patch along with all other available patches beyond UPDATE9 like FIBRE_SCSI v10 and SYS v11, which required system reboot.

I would surmize that if a PRODUCT UNDO is done on any patch that required a reboot to go in, that at the end of the PRODUCT UNDO, it will want to reboot and/or I should reboot to have full effect of rolling back/out the patch.

Comments anyone?

:) jck
0 Kudos
3 REPLIES 3
Andy Bustamante
Honored Contributor

‎02-13-2007 06:24 AM

‎02-13-2007 06:24 AM

Solution

Re: PRODUCT UNDO and need to reboot afterwards...

I'd agree with you, and the behavior of UPDATE on 7.3-2 would tend to confirm this. The update which included LAN failover for DE-500s. I had an issue with this, long since resolved. The PRODUCT UNDO required a reboot to restore previous behavior.

Andy
If you don't have time to do it right, when will you have time to do it over? Reach me at first_name + "." + last_name at sysmanager net
0 Kudos
John Koska
Advisor

‎02-13-2007 06:32 AM

‎02-13-2007 06:32 AM

Re: PRODUCT UNDO and need to reboot afterwards...

Thanks Andy. Hopefully you got the points I tried to assign. Will be closing thread, since you nailed it with your pass experience with PRODUCT UNDO.

:) jck
0 Kudos
John Koska
Advisor

‎02-13-2007 06:32 AM

‎02-13-2007 06:32 AM

Re: PRODUCT UNDO and need to reboot afterwards...

Closing thread. Thanks again. What a nice place to get an answer!

:) jck
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.