Question: Alpha4100 - old machine

[Davor_7]

i want to check the Alpha4100 memory size. and now, one MMB is in my hand(MEM0L). but i cannot find any information about memory size on it. i can see two big modules and lots of small modules on the MMB. anybody knows how to check the memory size from physical hardware ?
it's urgent! thanks in advance !

[Peter Quodling]

1. Put the memory back in, boot and type >>> show memory.

2. Look at the memory card, and report any numbers that look like B3020-xx , B3030-xx, B3032-xx or MS320-xx or MS330-xx or MS332-xx. Tell us what the -xx is, and all will be revealed.

q

[Davor_7]

hehe, the question is that this machine cannot be boot up
never mind, i have find the part no. on MMB
but another questiion

what's the difference between B3030-FA and B3030-FH ? they are both 512M, aren't they?

[David B Sneddon]

B3030-FA is 512MB 50ns EDO memory
B3030-FH is 512MB ?

Dave

[David B Sneddon]

Just found something that indicates that the
B3030-FH is 1GB, not 512MB

Dave

[Davor_7]

B3030-FH = 512MB
i get this message from GOOGLE
could you help me to confirm it ?

the difference i can find from MMB hardware is that FA is from SEC Korea, and FH is from NEC Japan

[Davor_7]

David, where you get such message ?

you could type B3030-FH in GOOGLE, and you will see lots of results show that it's 512M

[David B Sneddon]

I found sites that list the FH module as 512MB
and some that say 1GB -- I suspect it is indeed
512MB. I haven't yet found anything to indicate
manufacturer details.

Dave

[Davor_7]

hehe~ i'm also confused.
i'm checking with HP

[Antoniov. · Accepted solution]

Oh oh,
Davor,
I answered to another thread like this. I'm confused. Please, may you close one of them?

Here there is 4100 memory replacement page
http://h18002.www1.hp.com/alphaserver/options/as4100/as4100_1_options_sorted.html#OptListHead
Hope This Help

Antonio Vigliotti

[Willem Grooters]

Davor,

Like Peter said:

"Put the memory back in, boot and type >>> show memory. "

You do not have to boot the machine, just power up. If it is set to autoboot, hit ^P (CTRL-P) to interrupt. The only connections you need are ower and a console (PC with terminal emulator is Ok)

If powering up is no option either, then you have to rely on partnumbers inded.

[Davor_7]

thanks Tony, thanks all

i have confirmed with HP China
-FA & -FH are both 512M memory option

[Antoniov.]

Davor,
I saw Bunny on this thread. May be graceful you gift some points to somebody as you like to prefer.
Have a great day.

Antonio Vigliotti