T4 process name

[Jan van den Boogaard]

Hi all,

We're running T4 V4. The main process name is a bit strange, it's suggesting V3.4 instead of V4.0. Is this a tiny bug?

XXXXX::SYSMGR> sh sys/proc=t4*
OpenVMS V7.3-2 on node XXXXX 13-SEP-2007 13:38:50.44 Uptime 52 04:00:49
Pid Process Name State Pri I/O CPU Page flts Pages
20E56570 T4$V34_130001 HIB 5 740 0 00:00:00.10 1077 197 B
20E56578 T420E56570_MON LEF 15 18986 0 00:00:01.86 258 398 S
20E56579 T420E56570_XFC HIB 15 2520 0 00:00:00.13 424 205 S
20E5657A T420E56570_Lck7 HIB 15 2517 0 00:00:00.18 423 198 S
20E5657B T420E56570_TCP HIB 15 5039 0 00:00:00.33 501 296 S
20E5657C T420E56570_FCM HIB 15 19171 0 00:00:01.01 456 244 S
20E5657D T420E56570_EIA0 HIB 15 3369 0 00:00:00.20 548 243 S
20E5657E T420E56570_EIC0 HIB 15 3372 0 00:00:00.29 548 243 S

[Jan van den Boogaard]

Whats even more interesting , is , as you can see by the processnames, that COMP DISK SCS and FC data is not being collected.

Should we maybe install only T4 V4 , or first V3.3 and then V4 , in order to collect COMP DISK etc. (the most interesting perf.data) ?

[EdgarZamora_1 · Accepted solution]

The COMP DISK SCS csvs are extracted from the MON dat file.

[Ian Miller.]

Edit the T4$COLLECT.COM and change the T4EXTR lines to extract what you want.

You can change the main process name to whatever you what at the same time,