TDC "Warning message from TDC_TIMR"

[Juan M. Lazaro]

Hi to all,
I'm having some messages, as follows, with TDC.

%TDC-W-STATUS, Warning message from TDC_TIMR at 8-OCT-2006 21:00:00.00

[Snapshot: 512; State: Snapshot in progress]

=============== begin ===============

File: TDC_TIM_PROCESSOR.C

Function: TDC__TIM_SetTimer(), Line: 658

Message: Interval skew at collection time 513

[Calculated collection time has passed]

Time now: 8-OCT-2006 21:00:00.00

Calculated collection time: 8-OCT-2006 19:15:41.09

=============== end ===============


Anybody knows why I get this message?, because is not the correct time, the message says time now 21:00:00 and is not true, now are 23:59:00 aprox.

I have this error when I use /END, I replace it by the /COUNT and have the same error.

I'm using VMS 8.2, TDC 2.1.84 and the command I use to collect the data is:

TDC COLLECT /DETACH /COLLECTION_FILE='file_name' /INT=120 /COUNT=609 ECPALL

I've the same error using /COUNT or /END, the /COUNT parameter change its value depend the hour when the TDC is launched after a system reboot in the morning. The procedure is as follows:

A batch launch the TDC command at 00:02:00, a reboot procedure is done manually between 3:00 - 4:00, here the shutdown stops the TDC launched before, and starts automatically a new TDC, recalculating de /COUNT parameter.

Many thanks in advance about any suggestion.

Juan

[Juan M. Lazaro]

Ok, the problem was a SET TIME = 21 doing by the Operations department between 19:00 and 19:30.

Thanks to all

Juan